New Technology of Permanent Magnet Vernier Hub Motor in Vehicles
Keywords:
Liaoning University of Engineering and Technology, Liaoning, ChinaAbstract
In line with the "carbon neutrality" movement, China has seen a shift to electric vehicles replacing traditional fuel-powered vehicles. At present, the main operating modes of electric vehicles include: electric motor central drive form; Double motor electric drive wheel drive form; Internal rotor hub motor drive form; External rotor type hub motor drive form. In this case, the hub electric drive system stands out as the main drive method, and the efficiency of the hub electric drive system becomes very important. This paper explores new inspirations for wheel hub motors, focusing on the principles of magnetic field modulation, the use of permanent magnet vernier wheel hub motors in vehicles, examines the pros and cons of various permanent magnet vernier wheel hub motors, and ultimately outlines emerging technologies. to use permanent magnet vernier wheel hub motors in new energy vehicles.
References
[1] Gieras, J. F. (2009). Permanent magnet motor technology: design and applications. CRC press.
[2] Ponomarev, P. (2013). Tooth-coil permanent magnet synchronous machine design for special applications.
[3] Perekopskiy, S. (2020). On the analysis and design of in-wheel motor for vehicle application (Doctoral dissertation).
[4] Liu, H. (2015). Design of High-Efficiency Rare-Earth Permanent Magnet Synchronous Motor and Drive System.
[5] Gong, C., & Deng, F. (2021). Design and optimization of a high-torque-density low-torque-ripple vernier machine using ferrite magnets for direct-drive applications. IEEE Transactions on Industrial Electronics, 69(6), 5421-5431.
[6] Johnson, M. C. (2017). Design and analysis of axial and radial flux magnetic gears and magnetically geared machines (Doctoral dissertation).
[7] Tuncay, R. N., Ustun, O., Yilmaz, M., Gokce, C., & Karakaya, U. (2011, September). Design and implementation of an electric drive system for in-wheel motor electric vehicle applications. In 2011 IEEE Vehicle Power and Propulsion Conference (pp. 1-6). IEEE.
[8] Wei, Y. (2020). Analysis, design, and control of a novel Halbach-array-based two-phase motor (Doctoral dissertation).
[9] Wang, Y., Filippini, M., Bianchi, N., & Alotto, P. (2019). A review on magnetic gears: Topologies, computational models, and design aspects. IEEE Transactions on Industry Applications, 55(5), 4557-4566.
[10] Zhang, L., & He, R. (2020). Research on multi-mode regenerative braking energy recovery of electric vehicle with double rotor hub motor. International Journal of Vehicle Design, 82(1-4), 45-63.
*******************Cite this Article*******************
APA:
Wang, Y., & Liu, J. (2024). New Technology of Permanent Magnet Vernier Hub Motor in Vehicles. International Scientific Technical and Economic Research, 2(4), 77–86. http://www.istaer.online/index.php/Home/article/view/No.2481
GB/T 7714-2015:
Wang Yang, Liu Junyi. New Technology of Permanent Magnet Vernier Hub Motor in Vehicles[J]. International Scientific Technical and Economic Research, 2024, 2(4): 77–86. http://www.istaer.online/index.php/Home/article/view/No.2481
MLA:
Wang, Yang, and Junyi Liu. "New Technology of Permanent Magnet Vernier Hub Motor in Vehicles." International Scientific Technical and Economic Research, 2.4 (2024): 77-86. http://www.istaer.online/index.php/Home/article/view/No.2481
Downloads
Published
Issue
Section
License
Copyright (c) 2025 International Scientific Technical and Economic Research
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
This work is licensed under the Creative Commons Attribution International License (CC BY 4.0).
