Research on Sanxingdui Cultural Relic Geometry Based on Polar Coordinate Method and Linear Interpolation
DOI:
https://doi.org/10.71451/ISTAER2516Keywords:
Polar coordinates; Linear interpolation; Reference point; Circular arc parameter equation; Curve equationAbstract
This paper focuses on the analysis of the unearthed bronze solar wheel and gold mask. For the bronze solar wheel: Firstly, a plane coordinate system is established to transform the three dimensional plane diagram into a two dimensional plane map. Then, polar coordinates are introduced, and linear interpolation is constructed to obtain the curve equation of cultural relics. Mathematical model of the bronze solar wheel needs to be established, and the general equation of the internal arc should be derived. With the center of the bronze solar wheel as the origin of XOY, according to the general equation of the circle and by substituting the disk data, the bronze sun wheel curve equation can be obtained. On the XOY plane rectangular coordinate frame, through introducing polar coordinates, the POINT command in CAD can determine the intersection coordinates of the five rays in the disk and the angle with the horizontal axis. Substituting these into the polar coordinate equation, the five - ray equation can be obtained. To obtain the general equations of the circular arc, polar coordinates need to be established. For the drawing of bronze solar wheel four, six, eight, and 12 ray patterns, it can be obtained by adjusting the angle θ between the ray and the horizontal axis X through CAD.
**************** ACKNOWLEDGEMENTS****************
This work is supported by ministry of education industry-university cooperative education project (Grant No.: 231106441092432), the research and practice of integrating "curriculum thought and politics" into the whole process of graduation design of Mechanical engineering major: (Grant. No.: 30120300100-23-yb-jgkt03), research on the integration mechanism of "course-training-competition-creation-production" for innovation and entrepreneurship of mechanical engineering majors in applied local universities (Grant. No.: CXKT202405), Mechanical manufacturing equipment design school-level "gold class" construction project (Grant. No.: 30120324001).
References
[1] Fragueiro, A., Tosoni, A., Boccia, M., Di Matteo, R., Sestieri, C., & Committeri, G. (2024). Reference frames for spatial navigation and declarative memory: Individual differences in performance support the phylogenetic continuity hypothesis. Evolution and Human Behavior, 45(1), 20-26. DOI: https://doi.org/10.1016/j.evolhumbehav.2023.08.001 DOI: https://doi.org/10.1016/j.evolhumbehav.2023.08.001
[2] Szymkiewicz, R. (2024). Impact of interpolation on numerical properties of the method of characteristics used for solution of the transient pipe flow equations. Journal of Hydraulic Engineering, 150(5), 04024023. DOI: https://doi.org/10.1061/JHEND8.HYENG-13836 DOI: https://doi.org/10.1061/JHEND8.HYENG-13836
[3] Usmanov, S. (2024). On Estimates for Maximal Operators Associated with Singular Surfaces. Lobachevskii Journal of Mathematics, 45(2), 875-882. DOI: https://doi.org/10.1134/S1995080224600146 DOI: https://doi.org/10.1134/S1995080224600146
[4] Ma, X., Yao, B., Liu, W., Cai, Z., Li, Z., & Li, Z. (2024). Prediction and optimisation for surface roughness distribution in external spline shaping based on micro-element method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(6), 2044-2058. DOI: https://doi.org/10.1177/09544062231191705 DOI: https://doi.org/10.1177/09544062231191705
[5] Xinge, Z. H. A. N. G., Qiang, X. U., Chuanbiao, W. E. N., & Yue, L. U. O. (2024). Construction and optimization of traditional Chinese medicine constitution prediction models based on deep learning. Digital Chinese Medicine, 7(3), 241-255. DOI: https://doi.org/10.1016/j.dcmed.2024.12.004 DOI: https://doi.org/10.1016/j.dcmed.2024.12.004
[6] Wang, G., Han, Y., & Chang, J. (2024). Research on soil moisture content combination prediction model based on ARIMA and BP neural networks. Advanced Control for Applications: Engineering and Industrial Systems, 6(2), e139. DOI: https://doi.org/10.1002/adc2.139 DOI: https://doi.org/10.1002/adc2.139
[7] Zhao, T., Chen, G., Gatewongsa, T., & Busababodhin, P. (2025). Forecasting Agricultural Trade Based on TCN-LightGBM Models: A Data-Driven Decision. Research on World Agricultural Economy, 207-221. DOI: https://doi.org/10.36956/rwae.v6i1.1429 DOI: https://doi.org/10.36956/rwae.v6i1.1429
[8] Omer, J. (2015). Comparison of mixed-integer linear models for fuel-optimal air conflict resolution with recovery. IEEE Transactions on Intelligent Transportation Systems, 16(6), 3126-3137. DOI: https://doi.org/10.1109/TITS.2015.2434942 DOI: https://doi.org/10.1109/TITS.2015.2434942
[9] Turgay, S., & Dinçer, K. F. (2023). Optimizing inventory allocation for fast moving consumer goods: A stochastic model approach. Industrial Engineering and Innovation Management, 6(10), 77-86. DOI: https://doi.org/10.23977/ieim.2023.061011 DOI: https://doi.org/10.23977/ieim.2023.061011
[10] Wang, Z., Zhang, Z., Su, T., Ding, Z., & Zhao, T. (2024, December). Research on Supply Chain Network Optimisation Based on the CNNs-BiLSTM Model. In 2024 International Conference on Information Technology, Comunication Ecosystem and Management (ITCEM) (pp. 197-202). IEEE. DOI: https://doi.org/10.1109/ITCEM65710.2024.00044 DOI: https://doi.org/10.1109/ITCEM65710.2024.00044
Downloads
Published
Issue
Section
License
Copyright (c) 2025 International Scientific Technical and Economic Research
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
This work is licensed under the Creative Commons Attribution International License (CC BY 4.0).
